Properties of zirconia balls
At room temperature, it has high strength and toughness, high density, good wear resistance, high temperature and corrosion resistance, high rigidity, non-magnetic and electrical insulation properties, and a thermal expansion coefficient close to that of steel. The strength and hardness of zirconia ceramic beads remain almost unchanged at 600℃. Yttrium oxide as a stabilizer is produced by a special molding process and high temperature calcination stage.
|
1 . Physical Index |
|
|
True density |
3.85 g/cm3 |
|
Bulk density |
2.3g/cm3 |
|
Vicker hardness |
700HV |
|
2 . B series Particle size range (mm): |
Z series Particle size range (mm): |
|
B20:0.600-0.850 B30:0.425-0.600 B40:0.250-0.425 B60:0.150-0.300 B80:0.125-0.212 B100: 0.106-0.180 B120:0.063-0.125 B150: 0.053-0.106 B170:0.045-0.090 B205:0.000-0.063 |
Z100: 0.100-0.150 Z150: 0.150-0.210 Z210: 0.210-0.300 Z300: 0.300-0.425 Z425: 0.425-0.600 Z600: 0.600-0.850 Z850: 0.850-1.180 |
3 . The advantages of ceramic beads
1.High grinding efficiency: Yttrium stabilized TZP zirconia ceramic microspheres have 1.6x higher grinding efficiency than ordinary zirconia microspheres under the same conditions.
2.Good flowability: The product has good roundness, smooth surface and less wear on equipment compared to other abrasive media.
3.Impact resistance and low wear: TZP zirconia ceramic beads have good toughness and will not tear, tear or flake in high speed and high concentration machines, with a wear of only 2.1 zirconia silicate beads.
4.Low cost of use: Choosing this product will bring you a comprehensive cost reduction in dielectric loss, power consumption, laboratory and equipment, and greatly improve the product quality.
4 . Characteristics of ceramic beads
This product has the characteristics of high density, high hardness, low wear resistance, and corrosion resistance. It is an ideal and efficient grinding medium for grinding glazes/melts, pigments, ceramic materials, and various mineral powders. It is suitable for ceramics, cement, paint, and refractory materials. Inorganic mineral powder, etc...
5. Application
1 . Suitable for dry grinding, wet grinding, mineral grinding, quartz grinding, wire grinding, iron ore grinding, cement grinding, ceramic factory grinding, paint grinding, ore grinding, platinum grinding.
2 . Suitable for ball mills, grinders, pan grinders, vibration grinders, pebble grinders, grinders, rod grinders, grinders, ball mills
6 . Packaging instructions:
25kg/drum+pallet wrapped with film
12.5kg square bucket+paper box
Contact us
Tina
Qinyuan Fuda New Material Technology Co., Ltd
Address: Qinyuan, Shanxi Province
Mob.: +86 18636559668
Email:tina@fudanewmaterial.com
http://www. fudanewmaterial.com
We are a large domestic enterprise producing sandblasting materials ,Established in 2015.
We only produce high-quality, high-tech, high-quality, high-efficiency, long-life, high stability, and high standard products. Please choose imported materials to produce ceramic sand enterprise - FUDA
Hot Tags: best sandblasting media, China best sandblasting media manufacturers, suppliers, White Fused Alumina Powder, Pure Zirconium Powder, Zirconium Silicate Powder, Power or Communication 3D Braided Composite Cable Protective Pipe, Filler Bubbles Hollow Glass Microspheres, glass beads media
